[H-GEN] optus at home cable setup troubles
Snowy Angelique Maslov aka 'Snowpony'
snowy at snowy.org
Wed Sep 25 22:53:20 EDT 2002
[ Humbug *General* list - semi-serious discussions about Humbug and ]
[ Unix-related topics. Posts from non-subscribed addresses will vanish. ]
On Thu, 26 Sep 2002, Michael Anthon wrote:
> Date: Thu, 26 Sep 2002 12:43:35 +1000
> From: Michael Anthon <michael at anthon.net>
> Reply-To: general at lists.humbug.org.au
> To: general at lists.humbug.org.au
> Subject: Re: [H-GEN] optus at home cable setup troubles
>
> [ Humbug *General* list - semi-serious discussions about Humbug and ]
> [ Unix-related topics. Posts from non-subscribed addresses will vanish. ]
>
> > I'm trying to set up a linux box for optus at home cable
> > connection, using a stock redhat 7.3 box. As far as I am aware from
> > reading several websites, all that I need to do is set the interface
> > (eth1 in this case) to dhcp at boot up. This is not working for me. I've
> > also tried ifdown eth1 follwoed by /sbin/dhcpcd -d eth1 at the command
> > line, but it just times out. the connection was also tested initially
> > with a windows box and worked and the modem was reset when changing to
> > the linux box. I've also tried switching cables. It seems something
> > simple is missing, but I don't know what. Any help would be appreciated,
>
> I have a debian (powerpc) box hooked up to optus cable. During the initial
> configuration I had a similar problem in that no matter what I did I
> couldn't get a lease. Comparing notes with someone else who had the same
> setup working I discovered the only difference seemed to be that he was
> using dhclient (the ISC one) while I was using pump. I uninstalled pump and
> isntalled dhclient and it all started working..... go figure.
One thing I would add; just power-cycling the modem won't work. You need to
leave it off for a few minutes and then turn it back on so it actually does a
proper reset of itself and removes any cached arp entries it might have.
--
Snowy "Snowpony" Angelique Cerise Maslov : [ vulpine.pp.se/cgi-bin/furcode ]
My.... ----------------------------: FEuw3acdmrw/CA[Minature Albino]3adm
|\= Art http://www.snowy.org/ : rw/CF[Pony-fox]3admrw A++ C- Dm+++
- - = Life http://www.furryfaire.org/ : H+++ M++++ P+++ R++ T+++ W Z+++ Sf#
'- Dreams http://www.anthrocon.org/ : RLCT/GP a cblnu++++$ d e++ f+++ h++
Email: snowy at snowy.org Brisbane QLD AU : iwf+++ j++ p- sf#
[ UNSOLICITED COMMERCIAL EMAIL NOTICE ---- A reading fee of $25.00US will be ]
[ charged for any commercial email sent to this email account without prior ]
[ consent given for such material. ]
--
* This is list (humbug) general handled by majordomo at lists.humbug.org.au .
* Postings to this list are only accepted from subscribed addresses of
* lists 'general' or 'general-post'. See http://www.humbug.org.au/
More information about the General
mailing list