[H-GEN] Kernel compile
Willie Yeo
willie at ssc.qld.edu.au
Wed Sep 29 03:03:07 EDT 1999
[ Humbug *General* list - semi-serious discussions about Humbug and
Unix-related topics. ]
On Wed, 29 Sep 1999, Marshall, Joshua wrote:
> I'm having some problems booting a custom kernel (2.2.12) on my RH6.0
> box. It uses a SCSI disk (AIC7xxx driver) and as it boots it gives the
> following error:
Okay, I just opened my .configure file and had a look (under make
menuconfig), and this is what I did (not stated here means not enabled) :
SCSI SUPPORT --->
<*> SCSI support
--- SCSI support type (disk, tape, cdrom)
<*> SCSI disk suport
--- Some SCSI devices support multiple LUNs
[*] Probe all LUNs on each SCSI device
[*] Verbose SCSI error reporting (kernel size +=12K)
SCSI low-level drivers --->
<*> Adaptec AIC7xxx support
(8) Maximum number of TCQ commands per device
(5) Delay in seconds after SCSI bus reset
The rest of the stuff are all pretty default settings.
:----------------------------------------------------------------------:
Willie Yeo |
CNA, BIT-in-progress | : :
Network / Systems Administrator | This space for hire !
Saint Stephen's College | > VERY CHEAP <
Coomera, Gold Coast, | : :
AUSTRALIA |
--
This is list (humbug) general handled by majordomo at lists.humbug.org.au .
Postings only from subscribed addresses of lists general or general-post.
More information about the General
mailing list