[H-GEN] Further re installing my website.

[Harry Phillips]

On Mon, 2005-08-08 at 19:05 +1000, Russell Mathews wrote:
> 
> NAT (Network Address Translation) is Enabled and I can access “port 
> forwarding”. [I will have to work that one out. Eg Virtual Server is 
> used to allow Internet users access to LAN services. ; Rule Name; 
> Private IP; Port Start; Port End; Port Map. I may ask this list 
> community about that later, so do not bother about it now. I will think 

I will answer now if you don't mind, there are two ways to setup what
you want to do:

1. Forward everything to the one host, and
2. Forward certain ports to certain internal hosts and other ports to a
different host.

What you are describing above is for number 2. For number 1 you need to
go: Advanced / Virtual server / DMZ host.

Actually I just checked my DLink modem and found that the port in the
port forwarding section take precedence so the DMZ host is like a
default.

-- 
Regards,
Harry Phillips