[H-GEN] USB Scanner

[rodney]

[ Humbug *General* list - semi-serious discussions about Humbug and     ]
[ Unix-related topics. Posts from non-subscribed addresses will vanish. ]

G'Day,
Does any one know if the epson usb scanners (1650p) will work with a MSI 5184 
B. AT m\board with JUSB1 USB Connector

My manual says - USB Connector: JUSB1
Pin    SIGNAL    DESCRIPTION
1/10   VCC         +5V
2        -DATA 0   Negative Data Channel 0
3        +Data 0    Positive Data Channel 0 
4/5      GND        Ground
6/7      GND        Ground
8         +Data      Positive Data Channel 1
9         - Data      Negative Data Channel 1

My motherboard is just under 2 years old.

epson's site says-
SUPPORTED PLATFORMS
 USB I/F
 Microsoft® Windows® 98/2000 Professional/Me(pre-installed model or upgrade 
 of Windows® 98/Mepre-installed model)
 Mac OS® 8.5 to 9.x
 INTERFACES
 USB* (Type-B receptacle connector) x 1

Thankyou,
Rodney.

--
* This is list (humbug) general handled by majordomo at lists.humbug.org.au .
* Postings to this list are only accepted from subscribed addresses of
* lists 'general' or 'general-post'.  See http://www.humbug.org.au/