[H-GEN] Sun WS monitors
Frank Brand
fbrand at uq.net.au
Wed Jun 2 02:39:42 EDT 1999
(Note reply-to: being general at humbug.org.au vs Frank Brand <fbrand at uq.net.au>)
Craig Armour wrote:
>
>
> yeah, Invariably, SUN monitors are fixed frequency and don't allow the
> multitude of resolutions that are available via a standard VGA adapter.
> the connector (the wide one) is a 13w3 connector. You can get 13w3 sun
> -> 15pin vga cables but tend to be expensive, of the order of $70, and I
> am not sure about the other way (which is what you require) but all
> aside, as long as you can put up with the 1 (maybe two or three)
> resolutions that your monitor can support, have a vga card that can
> support the resolutions your monitor can, and can find a cable, they
> should work fine.
>
> Lart me here anytime if I'm wrong James? or Frank?
>
>
No I think what you say is reasonably accurate. Sometimes the sync rates can be a problem.
There is a guy at Kallangur that makes the cables quite reasonably. Bernard something but I
can't find his name.
Usually about $35
--
Frank Brand
E-mail: fbrand at uq.net.au
Home Page: http://www.uq.net.au/~zzfbrand
--
This is list (humbug) general handled by majordomo at lists.humbug.org.au .
Postings only from subscribed addresses of lists general or general-post.
More information about the General
mailing list