[H-GEN] FW: Onboard network cards

[Robert Stanford]

[ Humbug *General* list - semi-serious discussions about Humbug and     ]
[ Unix-related topics. Posts from non-subscribed addresses will vanish. ]

On Thu, 2003-03-13 at 20:52, Alex Delaforce wrote:
> Thanks for your advice regarding posting, you should see this in plain
> text.
> 
> The output of /proc/pci is in the attachment pci.output
> The motherboard is an intel D815EFV running a 733MHz Celeron with 66MHz
> FSB and 256 MB RAM

Bus  1, device   8, function  0:

    Class 0200: PCI device 8086:2449 (rev 1).

      IRQ 11.

      Master Capable.  Latency=32.  Min Gnt=8.Max Lat=56.

      Non-prefetchable 32 bit memory at 0xff8ff000 [0xff8fffff].

      I/O at 0xdf00 [0xdf3f].

That's an intel eepro100 as you said. Have you tried reseting pci
configuration data in the bios. Then at reboot

modprobe eepro100


-- 
Robert Stanford <rob at rotapile.com>


--
* This is list (humbug) general handled by majordomo at lists.humbug.org.au .
* Postings to this list are only accepted from subscribed addresses of
* lists 'general' or 'general-post'.  See http://www.humbug.org.au/