[H-GEN] SCSI adapters
Frank Brand
fbrand at uq.net.au
Tue Apr 9 23:26:48 EDT 2002
[ Humbug *General* list - semi-serious discussions about Humbug and ]
[ Unix-related topics. Posts from non-subscribed addresses will vanish. ]
From: http://www.scsisource.com/internal_scsi_adapters/
NOTE: US site, US dollars too.
SCA | 80 pin Female | to | 68 pin Female
(SE UW, LVD/Ultra2/Ultra160 compatible, low profile)
$9.00
SCA | 80 pin Female | to | 68 pin LVD/SE and 50 pin
$15.00
From: http://www.scsi-cables.com/sca-adapt.htm
Our adapter, when plugged onto an SCA 80-pin drive, converts the 80-pin
connection to that which is easily cabled to:
SCSI connector (either 50-pin "narrow" or 68-pin "wide")
4-pin Molex power plug
SCSI ID / Options header
Also look at http://www.scsistuff.com/adapters.htm
Those are just a few possibilities...there are hundreds...well dozens of
these suppliers in the USA. Very hard to find here though and, as Ewan says
not cheap.
I suspect you can get just about anything you need for your SCSI conversions
but it is very difficult to find some of this stuff in Australia. It may be
possible to have just about anything you need made up as a cable but I have
always found such exercises very expensive.
Frank Brand
--
* This is list (humbug) general handled by majordomo at lists.humbug.org.au .
* Postings to this list are only accepted from subscribed addresses of
* lists 'general' or 'general-post'. See http://www.humbug.org.au/
More information about the General
mailing list