[H-GEN] Open specific ports in IP MASQ

[Luke Grant]

(Note reply-to: being general at humbug.org.au vs "Luke Grant" <skywalke at webexpress.net.au>)

oops....sorry ......am too used to working with live IP's.

that is correct....that will not work if it is not using live ip's a -F -m
function is required.
==============================================================
Luke Grant
Network Administrator
Web Express Internet
E-Mail: (work)skywalke at webexpress.net.au,
              luke at webexpress.net.au
E-Mail: (home)zzlgrant at uq.net.au
Phone : +617 3285 3299
Fax   : +617 3285 7433
==============================================================
-----Original Message-----
From: Michael Anthon <mca at tams.com.au>
To: 'general at lists.humbug.org.au' <general at lists.humbug.org.au>
Date: Wednesday, 7 July 1999 10:17
Subject: RE: [H-GEN] Open specific ports in IP MASQ


>(Note reply-to: being general at humbug.org.au vs Michael Anthon
<mca at tams.com.au>)
>
>Ummmm.... I do believe that will not work.  It needs to be a forwarding
rule
>with the -m option to masquerade.
>
>Then again, I could be wrong
>
>Cheers
>Michael A.
>
>-----Original Message-----
>From: Luke Grant [mailto:skywalke at webexpress.net.au]
>Sent: Wednesday, 7 July 1999 9:35
>To: general at lists.humbug.org.au
>Subject: Re: [H-GEN] Open specific ports in IP MASQ
>
>
>(Note reply-to: being general at humbug.org.au vs "Luke Grant"
><skywalke at webexpress.net.au>)
>
>/sbin/ipfwadm -I -a acc -P tcp -D 203.17.185.180 2202
>
>Accepts all incomming tcp requests with a destination of 203.17.185.180
port
>2202.
>
>add -S b4 the -D for a source address.  eg. -S 192.168.0.0/24
>
>Luke
>
>
>==============================================================
>Luke Grant
>Network Administrator
>Web Express Internet
>E-Mail: (work)skywalke at webexpress.net.au,
>              luke at webexpress.net.au
>E-Mail: (home)zzlgrant at uq.net.au
>Phone : +617 3285 3299
>Fax   : +617 3285 7433
>==============================================================
>-----Original Message-----
>From: Harry Phillips <hfphillips at iname.com>
>To: Home Unix Brisbane Users Group (E-mail) <general at lists.humbug.org.au>
>Date: Tuesday, 6 July 1999 19:01
>Subject: [H-GEN] Open specific ports in IP MASQ
>
>
>>(Note reply-to: being general at humbug.org.au vs "Harry Phillips"
><hfphillips at iname.com>)
>>
>>Hi,
>>
>>I was wondering if anyone knew how to configure a Linux PC to allow IP
>>masquerading on a specific port.
>>
>>In particular port 2202. I want to be able to use the Commonwealth Bank
>>Netbank on the LAN. It uses the TCP protocol. The address it goes to is
>>203.17.185.180
>>
>>I wouldn't even know how to start and the HOWTO doesn't tell you. I am
>using
>>Mandrake 6.0 (basically Redhat 6.0) and a dynamic PPP connection.
>>
>>Regards,
>>Harry
>>
>>
>>--
>>This is list (humbug) general handled by majordomo at lists.humbug.org.au .
>>Postings only from subscribed addresses of lists general or general-post.
>
>
>--
>This is list (humbug) general handled by majordomo at lists.humbug.org.au .
>Postings only from subscribed addresses of lists general or general-post.
>
>--
>This is list (humbug) general handled by majordomo at lists.humbug.org.au .
>Postings only from subscribed addresses of lists general or general-post.
>


--
This is list (humbug) general handled by majordomo at lists.humbug.org.au .
Postings only from subscribed addresses of lists general or general-post.